Install / Remove

Installation

  • Before fully inserting the tumbler grips, lightly test fit on two opposite sides to ensure you will have a tight fit.  Due to slight differences in tolerances when the tumbler was assembled, some sides might be too loose.  Check first and watch the video below for a better understanding.

EZ Tumbler Grips installation video:

Removal

In case you need to remove the EZ Tumbler Grips, you can make a removal tool from a common wire coat hanger.  You will insert it into the holes on either side to help pull it out.  Please watch the video below for a better understanding.

EZ Tumbler Grips removal video: